- Overview -
This hydraulic power unit has a variety of applications and is widely used in many types of lifting equipment. Well known Deltroll valving is used in this hydraulic power unit.
- Mode deScription -
Mode specifications | Motor voltage | Electrical power | Displacement pumps | Pressure relief valve | Fuel tank capacity | Electromagnetic valve voltage |
YD-1W1.6EM1 | 12V DC | 2KW | 1.6ml/r | 16MPa | 3L | 12V DC |
YD-1W2.1DM1 | 2.1ml/r | 18MPa |
YD-2W1.6EM2 | 24V DC | 2KW | 1.6ml/r | 16PMa | 24V DC |
YD-2W2.1DM2 | 2.1ml/r | 18PMa |
- System Schematic - - Outlook Size -
- Warnings -
1. Motor cannot run continuosly. Run 1 minute on, then 9 minutes off. Then repeat cycle.
2. Prior to installation, insure all components are clean and free of all substances.
3. Insure adequate level of oil is in the reservoir prior to starting unit.
4. Viscosity of hydraulic oil should be 15~68CST. N46 hydraulic oil is recommended.
5. After the first 100 hours of operation, the hydraulic oil should be replaced. There after it is recommended to replace the hydraulic oil every 3000 hours of operation.
6. This power unit have two installation modes: horizontal and vertical. Please specify when ordering.